Bushwacked

Like 1/2 sides with 3/4 front/back? Or what do you mean?

Hah!! Now I just need some of those pennies on the dollar walnut deals ? And maybe one day get a trailer full of amazing wood from spanky

This worked just fine sending 2 boards through. Also found the page in the manual ... 12” minimum. I was right at that haha. After getting all the boards glued up for the mud room bench I had the rest of the afternoon to work on this ... got my finger hook drawn out thanks to a gallon can quick cutout with a jigsaw the round over profile ... I think it should work glued up with 2 screws in the back side too ... next time I think I’ll make the drawer out of one color with the face frame different haha. here’s the drawer first put together ... don’t ask me how long it took to figure out the base goes in from the side and not the back due to the way the DTs fit ... I will lie like a dog and say i got it right the first time ?

Got some work done here this morning ... tan the glued boards through the planer one last time just to make sure both pairs were good. then glued them all together. then started working on the template for the bench top since it’s not square ... leftover walnut scrap makes for an expensive template haha ?

yes I used the domino to help keep the alignment. These were the #6 dominoes

I dont have a picture of where this is going yet, but its the top of an already made bench. Just need to finish it off with some walnut .. Getting things milled down and parts glued together, plus some epoxy to fill some holes. This shop cart is the real MVP ... love this thing!! quick layout ... gluing 2 panels together. Will run through planer tomorrow for final few passes .. finishing the night off with some epoxy ..

so I have the drawer face ... from the cutoffs of my bench build that started. However, I am not sure how to mill these ?? They are about 11-12" long so I think too short to send through the planer ??

yep it was a great tool while it lasted. I enjoyed it and that is why I already ordered 2 more 1 each (4" and 1 6")

Thanks! Ya I was just getting it out of the floor there to clean up. Need to find a hanger for it the first one broke. I do have one mounted by my pencil sharpener on the back patio door though.

Figured out my issue with the door ... even the though hinges said full overlay, they are actually inset hinges. Gotta love Amazons seller descriptions. Now debating on making them inset so I dont need to order more hinges at the moment. these are what I ordered ... however looking at the pictures in there, they show inset ? https://www.amazon.com/gp/product/B01BEOX5VQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Here they are installed ... for now Also, the wife helped with organization as well in the shop today to get a lot of things put up in the cabinets .. power cords hung op out of the way next to the sink and found a nice spot for hearing protection for me and the boy

Here is the rest of the update ... test fit .. overall went well ... minus the dang 1/16 gap on the hinge side or so ... 7/8 from edge on the Blum manual seems like it should have been 15/16 or 1” or something. Otherwise I am missing something else ?‍♂️.... I’ll get some pics of that once I reinstall them after breakfast here the doors are getting some finish. cant be too mad though learning lots through this and only the 2nd time I’ve actually made cabinet doors and outside the gap the other stuff came out pretty good.

Thanks I will go take a look at those!

got some work done today and yesterday ... and test fitted the doors, however I thought I uploaded them but I guess not and my phone is downstairs so I will get those up tomorrow. Got the drill press setup for the 35mm holes .. While laying out the spots for my holes and marking the cabinets as well I was tightening up the double 90 6" ruler I had and the plastic piece busted off. IT was one of those harry epsteins or whatever the site is with the blemished tools. So that was annoying as I really did like it and worked great for the 2 years or so I have had it.

I think that pretty much sums it up exactly ? haha

Hah! Yep figured it was time to take the pull-up off and build a new closet ?

then got some cabinet work done as well .. Cut my slots for the door panels .. Now all glued up .. I do love having 2 doors, creates a nice draft through the garage in the summer, also helps keep some of the dust out of my face when using the miter saw when I turn it to blow down that direction ...

after some troubles and a quick visit from the brother in law ... I have the DT drawer made. The drawer is really good and pretty much without gaps, the DT are a little proud in the pic which is good so I can sand flush. Now, what I was unsure of was does this need a face board overtop of what is there? I am assuming so to completely hide the drawer guides when looking at the front of it when pushed in. Just first time with an actual nice drawer so not sure what people normally do ?

haha, it does look good, however dont let me get you stabbed in the middle of the night ?

crazy idea here ... but to me, maybe the top and bottom glass, then combine with middle for a bigger one ?? or stick with 5 I like that look too ?

haha wow! That is crazy he was up there! Reminds me of the movie Ratatouille

is the job not going that well so they keep extending you? Or just more work than expected? Should be an interesting Aug 16th ?

thanks! Yes, I am leaning toward walnut as well just to keep it 'simple' looking and not get too crazy LOL! 'a little' ? Thanks! I am working at right now since I am back to work and it is great so far! Solid and doesnt wiggle! Nice room for the 3 computers I have on it and overall opened up the room quite a bit and doesnt feel cluttered anymore.

I will take a look around and see what I can find .. Worst case I go with what I have now, a walnut front. Then later on down the road, built a different one if I want a change.

Thanks guys! Really happy so far with it! Now if I can just get some dovetail drawers made without turning too much wood into scrap, we should be good ? haha ' Also, while I was at woodcraft, I was walking through their wood section ... would something besides a walnut front be a better look? I was thinking maybe a birdseye maple front or something like that? OR would just sticking with the solid walnut all over be better?

well here it is installed and in use ... still need to build the drawer, but I am thinking I can get to that this weekend now that I will have the bushing I need to do the dovetails. For now though, here is where it stands .. work laptop, home computer, home laptop ... fit nicely on here