Bushwacked Posted March 28, 2021 Share Posted March 28, 2021 looking for 2 gates, a 4" and 6". I noticed running them both open, the collection is not as good as it should be. So sucking it up and spending a little more $$ to get it right. What do yall recommend? I have read several things going back and forth on almost all gates out there and even the custom made ones. Quote Link to comment Share on other sites More sharing options...
Kev Posted March 28, 2021 Share Posted March 28, 2021 27 minutes ago, Bushwacked said: looking for 2 gates, a 4" and 6". I noticed running them both open, the collection is not as good as it should be. So sucking it up and spending a little more $$ to get it right. What do yall recommend? I have read several things going back and forth on almost all gates out there and even the custom made ones. I'm sure the others will chime in with more cost effective options that work just as well but, all of mine are Nordfab and work well. 1 Quote Link to comment Share on other sites More sharing options...
Chet Posted March 28, 2021 Share Posted March 28, 2021 Mine are all the ones Woodcraft carries. The aluminum ones not plastic. I have been happy with them, they have been in use for seven years. I just checked their website, the 6" are $30, 4" are $18 and the 2 1/2" are $16. 1 Quote "Do not spoil what you have by desiring what you have not; remember that what you now have was once among the things you only hoped for." - Epicurus Link to comment Share on other sites More sharing options...
Woodenskye (Bryan) Posted March 29, 2021 Share Posted March 29, 2021 You could also may your own if you have some scrap ply around. 1/2” and 1/4” 1 Quote Link to comment Share on other sites More sharing options...
Bushwacked Posted March 29, 2021 Author Share Posted March 29, 2021 3 hours ago, Chet said: Mine are all the ones Woodcraft carries. The aluminum ones not plastic. I have been happy with them, they have been in use for seven years. I just checked their website, the 6" are $30, 4" are $18 and the 2 1/2" are $16. Thanks! I think I will go grab some of those since it will be quick. Quote Link to comment Share on other sites More sharing options...
pkinneb Posted March 29, 2021 Share Posted March 29, 2021 Most of mine are metal from Oneida with the exception of my manifold which is plywood with hardboard shop made gates. Quote Link to comment Share on other sites More sharing options...
Jamie Posted March 30, 2021 Share Posted March 30, 2021 I like the jet ones from amazon. Metal is 10x better than plastic. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.