pkinneb Posted March 28, 2021 Share Posted March 28, 2021 3 hours ago, Chet said: Looks like I want the blue stuff, not the red? Correct! Quote Link to comment Share on other sites More sharing options...
Chet Posted March 28, 2021 Author Share Posted March 28, 2021 I did the Loc-tite. It says that you have ten minutes of open time and then to let it cure for 24 hrs. So to give myself an extra edge time wise I got it close to level then remove one screw at a time, applied the Loc-tite and re inserted it. after that I went a round and made final adjustments. Ten minutes isn't as long as you think it is when doing something like this. 1 Quote "Do not spoil what you have by desiring what you have not; remember that what you now have was once among the things you only hoped for." - Epicurus Link to comment Share on other sites More sharing options...
Kev Posted March 28, 2021 Share Posted March 28, 2021 26 minutes ago, Chet said: I did the Loc-tite. It says that you have ten minutes of open time and then to let it cure for 24 hrs. So to give myself an extra edge time wise I got it close to level then remove one screw at a time, applied the Loc-tite and re inserted it. after that I went a round and made final adjustments. Ten minutes isn't as long as you think it is when doing something like this. Yes! When you're focused on something, time flies by! I always get a little comfort knowing those numbers have a bit of a "safety factor" built in.. Quote Link to comment Share on other sites More sharing options...
jackcartermo Posted January 24, 2022 Share Posted January 24, 2022 My router lift plate is stuck and I can not release the bit from the collect. The lift system is of Incra brand. What is the best way to remove the plate and the bit. Quote Link to comment Share on other sites More sharing options...
Kev Posted January 24, 2022 Share Posted January 24, 2022 6 hours ago, jackcartermo said: My router lift plate is stuck and I can not release the bit from the collect. The lift system is of Incra brand. What is the best way to remove the plate and the bit. Can you show us pictures of your problem? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.