Coop Posted April 26, 2021 Share Posted April 26, 2021 Instead of posting a shop tip, perhaps the answers to my question, will create one(s). How do you guys address the final trimming of these to be flush with the box sides? I currently use a box plane to get as close as possible and use the ros to finish it off. Quote Link to comment Share on other sites More sharing options...
Chet Posted April 26, 2021 Share Posted April 26, 2021 I use a flush trim saw and then sand. 2 Quote "Do not spoil what you have by desiring what you have not; remember that what you now have was once among the things you only hoped for." - Epicurus Link to comment Share on other sites More sharing options...
Kev Posted April 26, 2021 Share Posted April 26, 2021 I also use a flush trim saw and then sand. 1 Quote Link to comment Share on other sites More sharing options...
pkinneb Posted April 26, 2021 Share Posted April 26, 2021 Bandsaw then ROS 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.