Tmize Posted July 14, 2020 Share Posted July 14, 2020 So I was looking at some material to put on my vise faces. I came across this stuff. It’s only 1” wide if put that at the top edge of the vise would that give me the same holding power as it would if I did the whole face. My Moxon an leg vise both have toe in so would that work the way I’m thinking?https://presbond.com/products/1-16-thick-cork-rubber-tape-1-width-x-100-length-acrylic-adhesive?variant=22280978563157¤cy=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&gclid=EAIaIQobChMIuf3uzMzL6gIVCeDICh15aQIDEAQYBiABEgKub_D_BwE Quote Link to comment Share on other sites More sharing options...
Kev Posted July 14, 2020 Share Posted July 14, 2020 I'm sure it's not right but, I don't have any material in any of my vises.. My first leg vise got the leather that came with the kit but, it didn't last long and is now a "drip catcher" under the spouts on my epoxy cans...lol Quote Link to comment Share on other sites More sharing options...
Chet Posted July 14, 2020 Share Posted July 14, 2020 I ordered this stuff from Benchcrafted Crubber Comes in two sizes. Quote "Do not spoil what you have by desiring what you have not; remember that what you now have was once among the things you only hoped for." - Epicurus Link to comment Share on other sites More sharing options...
Tmize Posted July 15, 2020 Author Share Posted July 15, 2020 19 hours ago, Chet said: I ordered this stuff from Benchcrafted Crubber Comes in two sizes. I looked at it before I think that will be the most cost efficient way of going about it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.