Bushwacked

Interesting thought on the mats. Going to have to look into that as that does sound like a great keep clean solution. paint eh? Didn’t even cross my mind … what color would you be thinking for the wood? White? I’ll have to bring this up to my buddy. Lol!! Shag carpet in those big conversion vans. I remember my moms and she’d drive around the baseball team when we were little. I was thinking that but not sure on how well the weather would be or how slippery etc if it got wet boots on it Test fitting the foam pads … I’m 6’2 and I fit diagonally accord without bending goofy. I was surprised by this. starting work on the sink …

When my buddy called me up and mentioned he’d been watching a lot of YouTube and bought a minivan for me to convert, I first laughed and thought he was kidding . He wasn’t so I said hell ya let’s do it!! the sweet ride … overall design idea at the moment .. getting a template cutout for the in floor storage… Gluing the bigger pieces together this is pretty fun getting to do something out of the ordinary! my main question for now is what type of finish would be good for this? Mainly thinking of the floor in the “kitchen” area where shoes/dirt/water/mud will be in contact with it. I was thinking maybe shellac or something cheap for the majority of everything?

Saw this in a FB group and figured I’d share as I have never seen it like this before .. super simple looking and cuts both side

I just went with 2 coats of shellac ... had a little bit left in the can and worked out to be just enough.

That was pretty neat! Some people really do have that 'out of box' ability

ended up redoing the top piece that was ruined ... went with some gorilla epoxy, as it was at HD and I could get it right then. Dabbed it into the hole with a smaller dowel and then rubbed the edges a little with it. The hinges seem to be stuck in there pretty good now ... what a pain in the ass!! Took way more time than it should have haha. Guess next time I need to go with different hinges if its going to be that small, or upgrade to bigger hinges with the actual screw you can use to tighten. Thanks for the help guys!

Not these … not sure if too small or Chinese knock off but this is the inside …

I have these barrel hinges for a little ring box I am making. Ruined the first round because I tried CA glue and it got into the hinge mechanism and clogged it all up. Assuming I just put too much in there … but is CA glue still the best idea to glue them in? this was after I ruined it and drilled out that hinge

Thanks guys!! yes I went with a film topping as it had a cool pattern however it was put on only with water and static?? I’m not sure how well it will hold up. I wouldn’t recommend the film on it either and I won’t use it again. It was easy to install and everything I just don’t think it is going to last long and not bubble. A couple other pics… it was super hard to get the texture from the film in picture

Sorry got a little busy with sport seasons kicking off … we got 2 soccers, a baseball and a softball season haha. We kinda busy. I will take a few better pics tomorrow when I get some free time. Here is a quick and dirty one though.

LOL! I see what you did there 😉 I need to get better at remembering to use it

Does anyone have any idea on where to get just the velvet ring holders like this: https://www.target.com/p/juvale-5-pack-black-velvet-ring-display-trays-holder-organizer-jewelry-storage-case-pad-3-slots-black-5-5-x-3-3-x-0-78-inches/-/A-78771249 Is there any place outside of target to get these? I just need the holder like the picture as its going into a box ... Never messed with this type of thing before. Can you make your own?

is he still using it or has life gotten in the way?

haha glad to hear you are human after all in the shop 🙂 The wenge addition might actually turn out to be better than you think. It could add just enough contrast to really make it a great addition. But ya, I am with Coop, I would of had a smaller table haha

I have been thinking of trying out Rubio as well ... been watching a lot of blacktail studio builds lately and that finish always makes the wood look great! Also seems pretty easy to apply too. interested in hearing both sides...

Hah! after reading Tmize comment I will skip this one for now since I have a 7 and 5 year old so they need to be a little tougher. ordered 1 of these to test out and see how it goes. will order more if they work as good as they look to in the pictures. Will let you know my thoughts once they get installed ... they show up on Thursday so I think Friday I should have time to get to it.

thanks! here is a quick and dirty shot I took the other day … GF high performance will be the finish sprayed on

Thanks guys I’ll take a look! hah! Coop I’ve never had a basement either. Must be nice to have that extra space.

Soooo when we built the mud room we had a great idea for in the wall storage. Brooms and mops and stuff. Thing ls we though would be small enough. However all the mounting options we found don’t really help keep things clean looking and in the wall. first idea we had was a cork board door that we could pin stuff to if we needed. Well with having a door on there doesn’t leave much room at all. So the cork board (left) is just sitting there waiting to be turned into a smaller board for my daughters room to tack stuff onto it. do y’all have any ideas on getting stuff in there? Mounting hardware? Would it be ok for some stuff to stick out a little?

Final check with glass and rounded corners .. got my figure 8s figured out wiped down with mineral spirits and ready for finish tomorrow.

yes they are and they did 🙂 ... good to know though for the future when I need to use these I did recess them, its just a really weird looking picture ... that is actually sitting flush with the top, although it looks like it is just sitting on top haha. The problem with using those is where they are, the rabbeted wood is only about 1/4 thick so I would need a tiny screw for that and not sure how well it would actually hold

I will definitely try this out on a future build ... got my issue worked out for now

gotcha .. thanks for the info As far as the figure 8's on the side ... I just assumed they were too big to fit, but I didnt look as I was frustrated with the other part and had to go pick up kids from school. I just went to check and they did fit so I installed them.

so just some like 3" screws or so, I believe, would be the length to attach it? so just the 2 screws in the sides ... would let wood move enough and hold it if picked up by the top? Thanks I will take a look at that and see Interesting on the dowel idea ... assuming the dowels would still let the top wood move? Even if they were glued in?

also ... for the frosted glass ... did yall use a film? https://www.amazon.com/Privacy-Frosted-Decorative-Covering-Bathroom/dp/B08TWWGQN1/ref=sr_1_3?crid=3YHHIDEH9PX6&dchild=1&keywords=frosted%2Bglass%2Bwindow%2Bfilm&qid=1629392886&sprefix=frosted%2B%2Caps%2C314&sr=8-3&th=1 Like that? Just one of the first things that popped up on amazon.